Split Mold Balloon Forming Machine - BFMS-500-S2

Description

The Split Mold Balloon Forming Machine (BFMS-500- S2) is the third machine in a range of balloon forming machines that is being developed by MPT Europe BV and has full servo control on the proximal and distal axis. This allows for precise and fast stretching of the parisons during the balloon-forming process. The axis have force control and individual loadcell systems allowing forces to be monitored and used as control parameters during the process. 

Available Options: Integrated High-Pressure Generation • Active Pressure Drop Control (APDC) • Parison Pre-Heating 

Specifications

  • Flexible Process Interface for virtual limitless process cycle options on large 19” full color touch panel interface.
  • Fast and strong full servo-controlled axis for repeatable and reliable stretching of the parison materials during the forming process. 
  • Integrated safety light curtain with intuitive user interaction for safe operation.
  • Optional High-Pressure system integrated eliminating the need for a high-pressure factory network or the use of N2-bottles. 
  • Standard equipped with a safety light curtain with intuitive operator feedback.
  • Large 19” full color touch screen user interface for easy overview of the machine behaviour.
  • Standalone Flexible Process Interface software package available for off-line development of processes. 

Technical Specs

TECHNICAL SPECIFICATION

BFMS-500-S2

Stretch force

500 N max

Stretch speed

250 mm/s max. (servo controlled)

Stretch acceleration

2000 mm/s2

Stretch length

500 mm proximal and 500 mm distal

Clamping

Self aligning high force distal and proximal clamps

Inflation pressure

1-50 bar max +/- 0.2%

Pressure control

Active Pressure Drop Control (APDC)

Temperature heating system

20 °C – 220 °C +/- 0.5 °C

Preheat system

Proximal preheating system

Mold diameter

Up to 50 mm

Block lengths

80 mm, 120 mm, 160 mm, 200 mm & other sizes possible

GUI

19” color touch panel

Control software

Flexible Process Interface (FPI)

Zoomable process graphs with process markers
Recipe based

Password levels (operator, engineer, calibrator)
External FPI software availble for off-line development

Remote support option

Indicators

Optional signal light / acoustic alarm (user programmable)

Ethernet

2x

USB

4x

Required air pressure

7 bar minimum (pre-dried in case of integrated pressure boosting system)

N2 system

Using external N2 system (bottles or factory line) / optional high-pressure generator system require 7 bar feed pressure with internal 1L high pressure buffer vessel

Power supply

115 or 240 VAC / 2kW

Cooling circuit

Cooler with 5L resevoir + temperature and level detection

Safety systems

Light curtain with intuitive operator feedback